Processor
Processor Family
Intel® Atom x6214RE, x6425RE
Processor
Intel Atom x6214RE | 2 | 2 | 1.4GHz | 1.5MB | DDR4-3200 | Intel HD Graphics |
Intel Atom x6425RE | 4 | 4 | 1.9GHz | 1.5MB | DDR4-3200 | Intel HD Graphics |
Operating System
Operating System
- Windows® 10 IoT Enterprise LTSC 2021
- IGEL Linux
- Ubuntu Core™ 22 (kernel 5.15)
- Ubuntu Server 22.04 (kernel 5.15)
- No operating system
Graphics
Graphics
Intel UHD Graphics | Integrated | Shared | 1x HDMI® 1.4b , 1x DP 1.4 | 3840x2160@30Hz(HDMI), 4096x2160@60Hz(DP) | DirectX® 12 |
Monitor Support
Monitor Support
Supports up to 2 independent displays via onboard ports (DisplayPort™ and HDMI)
Chipset
Chipset
Intel SoC (System on Chip) platform
Memory
Max Memory
Up to 32GB DDR4-3200
Memory Slots
Two DDR4 SO-DIMM slots, dual-channel capable
Memory Protection[1]
IB-ECC
Notes:
- IB-ECC is hardware function ready and support by Yocto OS according to Intel POR
Storage
Storage Support[1]
- SE10:
One drive, up to 1TB M.2 SSD
- SE10-I:
Up to two drives, 64GB eMMC 5.1 on systemboard + 1x M.2 SSD
• M.2 SSD up to 1TB
• 64GB eMMC 5.1, for SE10-I (-20~60°C) only
Storage Type
Flash Memory | eMMC 5.1 | - |
M.2 2230 SSD | PCIe® NVMe®, PCIe 3.0 | - |
M.2 2280 SSD | PCIe NVMe, PCIe 4.0 x4 | Opal 2.0 |
Notes:
- The storage capacity supported is based on the test results with current Lenovo® storage offerings. The system may support larger storage as the technology develops.
Power Supply
Power Supply
90W | Adapter | 89% | Autosensing, 115-230V, for SE10-I only, System temperature will downgrade to 0℃-40℃ (0℉-104℉) |
65W | Adapter | 88% | Autosensing, 115-230V, for SE10 (0~50°C) only |
65W | Adapter | 89% | Autosensing, 115-230V, for SE10-I (-20~60°C) only |
WDC-in | Connector only | - | 3 Pin Phoenix Connector, 9-36V, for SE10-I (-20~60°C) only |
Network
Ethernet
Dual 2.5 gigabit Ethernet (Intel Ethernet Controller I225-IT), 2x RJ-45, supports Wake-on-LAN
WLAN + Bluetooth®[1][2]
- SE10:
Mediatek Wi-Fi® 6 MT7921, 802.11ax 2x2 Wi-Fi + Bluetooth 5.1, M.2 Card
Intel Wi-Fi 6 AX210, 802.11ax 2x2 Wi-Fi + Bluetooth 5.1, M.2 Card
No WLAN and Bluetooth
- SE10-I:
Intel Wireless-AC 9260, 802.11ac Dual Band 2x2 Wi-Fi + Bluetooth 5.1, M.2 card
Intel Wi-Fi 6 AX210, 802.11ax 2x2 Wi-Fi + Bluetooth 5.1, M.2 Card
WWAN[3]
- Quectel EM05-G, 4G LTE CAT4[4]
- No support
Notes:
- Bluetooth 5.2 is hardware ready but may run at a lower version due to OS limitations.
- WiFi M.2 card and WiFi antenna are pre-configured only
- eSIM function only works on Win10 IoT LTSC
- WWAN card and WWAN antenna are pre-configured only
Ports[1]
Front Ports
- 2x USB 3.2 Gen 2
- 1x line-out (3.5mm)
- 1x microphone (3.5mm)
- 3x LED (LED1: storage / LED2: Wireless / LED3: User defined or WWAN)
- 2x Serial (RS232 / RS422 / RS485, BIOS selectable)
Optional Front Ports[2]
- Expansion IO (SE10-I only):
2x 2.5 GbE (RJ-45, PoE, PSE 15.4W) or
2x CAN (BUS / OPEN) or
2x Serial (RS232 / RS422 / RS485, Driver selectable)[3]
- 4x DI / 4x DO (SE10-I only)
- 2x RP-SMA Female, WWAN antenna
- None
Rear Ports
- 1x HDMI 1.4b
- 1x DisplayPort 1.4
- 2x USB 2.0
- 2x 2.5GbE Ethernet (RJ-45)
- 1x Slim Tip power connector (SE10 only)
- 1x DC-in 3pin Phoenix connector for 9-36V WDC (SE10-I only)
- 1x 2pin remote power switch (SE10-I only)
Optional Rear Ports
2x RP-SMA Female, Wi-Fi antenna
Left Ports[4]
- 1x Nano SIM slot
- 1x SD card slot
Notes:
- The transfer speed of following ports will vary and, depending on many factors, such as the processing speed of the host device, file attributes and other factors related to system configuration and your operating environment, will be slower than theoretical speed.
USB 2.0: 480 Mbit/s;
USB 3.2 Gen 1 (SuperSpeed USB 5Gbps, formerly USB 3.0 / USB 3.1 Gen 1): 5 Gbit/s;
USB 3.2 Gen 2 (SuperSpeed USB 10Gbps, formerly USB 3.1 Gen 2): 10 Gbit/s;
USB4® 20Gbps / USB 3.2 Gen 2x2 (SuperSpeed USB 20Gbps): 20 Gbit/s;
USB4 40Gbps (USB 40Gbps): 40 Gbit/s;
Thunderbolt™ 3/4: 40 Gbit/s
- Depending on user cases, the actual transfer rate using the Ethernet ports on this device may slower than 2.5Gbps.
- Expansion IO can choose one of 2x 2.5 GbE RJ-45 / 2x CAN / 2x Serial
- Nano SIM slot only function with optional 4G WWAN. Card holder is optional, card holder only comes with card.
Security
Security Chip
Discrete TPM 2.0, TCG certified
Other Security
- NITS SP800-147B compliant
- ThinkShield
System Management
System Management
XClarity In-Band manageability
Operating Environment
Temperature[1]
- SE10:
Operating: IEC60068-2-1 Test A: Cold, IEC 60068-2-2 Test B: Dry heat, 0°C (32°F) to 50°C (122°F), with airflow 0.7m/s
Non-operating: IEC60068-2-1 Test A: Cold, IEC 60068-2-2 Test B: Dry heat, -40°C (-4°F) to 85°C (185°F)
- SE10-I:
Operating: IEC60068-2-1 Test A: Cold, IEC 60068-2-2 Test B: Dry heat, -20°C (-4°F) to 60°C (140°F), with airflow 0.7m/s
Non-operating: IEC60068-2-1 Test A: Cold, IEC 60068-2-2 Test B: Dry heat, -40°C (-4°F) to 85°C (185°F)
Humidity
- Relative humidity storage: IEC 60068-2-66 Damp heat, steady state 90%@60°C
- Relative humidity operating: IEC 60068-2-66 Damp heat, steady state 95%@40°C non-condensing
Shock Protection
IEC 60068-2-27, shock, operating, 30G / 11ms, half sine
Vibration Protection
IEC 60068-2-64, Vibration, Operating, 3Grms, random, 5 ~ 500Hz, 1hr/axis
MTBF Prediction
MTBF @60°C / @40°C
HALT
HALT testing methodology, LOL / UOL depends on real test result
Ingress Protection
IP50 standard
Flowing Mixed Gas Corrosion
IEC 60068-2-60, 25℃/75%RH Gas concentration: H2S/0.01ppm, SO2/0.2ppm, NO2/0.2ppm, Cl2/0.01ppm, 21days
Notes:
- SE10-I (operating -20°C to 60°C) models include: 12NK, 12NL, 12NS, 12NT
SE10 (operating 0°C to 50°C) models include: 12NH, 12NJ, 12NQ, 12NR